T Slat Wall, Channel, and Hinge Router Bits by MLCS

Great for jigs and fixtures!

See Options Below

Shop with Confidence. Our GUARANTEE.

Mill horizontal "T" slots which accept the head of a standard bolt and washer, perfect for making sliding shop fixtures and jigs. Can be used for making T-slots to hang brackets in wall panels or commercial display units at a fraction of the cost of pre-cut panels. Also used for removable hinges. Once you have cut your panels, reinforce them with our T-Track Extrusion (#416-0439) so your slat wall can handle heavier items.

All bits are carbide-tipped with anti-kickback design.

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Flutes (D)
Item # Price    Qty
2 3/4" 3/8" 1/8" 1/2" 1/4" P13-2405 $12.00
2 3/4" 3/8" 1/4" 1/2" 1/4" P13-2406 $17.00
2 1" 3/8" 3/8" 1/2" 1/2" P13-2407 $18.00
2 1-3/16" 3/8" 1/4" 1/4" 1/2" P13-2409 $29.00
4 ft. Extruded Aluminum Slat Wall Insert 416-0439
Buy 1 or more for $6.49 each
Buy 6 or more for $5.97 each
Mini T-Track Bolts 1/4-20 X 3" (Pkg 12) 416-0391
Buy 1 or more for $2.99 each
Buy 2 or more for $2.79 each
Sign up for our eNewsletter