Bowl and Tray Dish Cutter Router Bits by MLCS

Make trays, coasters and more.

See Options Below

Shop with Confidence. Our GUARANTEE.

2 flute, carbide tipped router bits.

  • Cut a straight edge with a 3/16" or 1/4" radius rounded corner and a flat bottom-all with one bit.
  • Used for routing pockets in serving trays, making coasters, plates, bowls, raised letter signs, etc.
  • Items #5516, 7813, 7816 and #7817 feature a TOP MOUNTED BEARING that follows your template to produce identical cuts every time. Use in a plunge router for best results.

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Image (R)
Radius
(D)
Large Diameter
(L)
Cutting Length
Overall Length Shank Size Item # Price    Qty
3/16" 3/4" 1/2" 2-3/8" 1/4" #5516
(Old/Eagle P13-2502B)
$19.00
Backordered until 9/30/2021. Reserve Now!
1/4" 3/4" 1/2" 2-3/8" 1/2" #7813
(Old/Eagle P13-2503B)
$20.00
3/16" 1" 1/2" 2-3/8" 1/2" #7814
(Old/Eagle P13-2505)
$16.00
1/4" 1-1/8" 1/2" - 1/2" 7816 $22.00
3/16" 1-1/4" 1/2" 2-3/8" 1/2" #7815
(Old/Eagle P13-2504)
$19.00
1/4" 1-1/4" 5/8" 2-3/8" 1/2" #7817
(Old/Eagle P13-2504B)
$24.00
Sign up for our eNewsletter