Chamfer Bits by MLCS

Use for edge forming, laminate trimming and glue joining.

See Options Below

Shop with Confidence. Our GUARANTEE.

Full Description Below...

The perfect bit to make multi-sided boxes, planters, columns or beams. All bits two flute, carbide tipped, anti-kickback design with bearing guides.

GET EXTRA SAVINGS when you buy a set!

#P10-1427, 3 Piece Set- 1/2" shank, includes:
•P14-2817 = 15° x 7/8"
•P14-2800 = 30° x 7/8"
•P14-2807 = 45° x 5/8"

# of
Box Sides
Degree
Used
445°
630°
822-1/2°
1215°


brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

(A)
Degree
(B)
Cutting
Length
(L)
Cutting
Depth
(D)
Large
Diameter
Overall
Length
Shank Size Item # Price    Qty
15° 1" 15/16" 1" 2-7/8" 1/2" P14-2817 REG. $25.97
SALE $21.00
22-1/2° 1" 15/16" 1-1/4" 2-7/8" 1/2" P14-2802 REG. $26.88
SALE $22.00
30° 1" 7/8" 1-1/2" 3-1/4" 1/2" P14-2800 REG. $28.98
SALE $22.00
45° 3/8" 9/32" 1" 2-1/4" 1/4" P14-2815 REG. $20.98
SALE $13.00
45° 5/8" 7/16" 1-1/2" 2-3/8" 1/4" P14-2806 REG. $22.97
SALE $15.00
45° 5/8" 7/16" 1-7/16" 2-7/8" 1/2" P14-2807 REG. $23.97
SALE $18.00
45° 7/8" 11/16" 1-3/4" 3" 1/2" P14-2809 REG. $30.98
SALE $20.00
45° 1" 3/4" 2" 3-1/8" 1/2" P14-2811 REG. $32.97
SALE $23.00
45° 1-3/8" 1-1/16" 2-1/2" 3-3/8" 1/2" P14-2810 $30.00
Backordered until 3/14/2019. Reserve Now!
3 Pc Chamfer Set- 1/2" Shank P10-1427 REG. $78.92
SALE $64.99
Sign up for our eNewsletter