Roundover / Beading Bits by MLCS

See Options Below

Shop with Confidence. Our GUARANTEE.

Convert roundover bits to beading bits, simply by changing to a smaller 3/8" bearing. Flip stock over and make a second pass for half round edges. Adjust cutter height to vary the upper straight reveal. All bits two flute, carbide tipped with bearing guide. Anti-kickback design.

SAVE when you buy a set! Click here to save more on sets.

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

(R)
Radius
(D)
Diameter
(L)
Length
Overall
Length
Shank Size Item # Price    Qty
1/16" 5/8" 1/2" 2" 1/4" P14-3101 REG. $16.97
SALE $11.00
1/8" 3/4" 1/2" 2-3/16" 1/4" P14-3102 REG. $16.97
SALE $11.00
1/8" 3/4" 3/8" 2-1/4" 1/2" P14-3103 REG. $16.97
SALE $11.00
3/16" 7/8" 3/8" 2" 1/4" P14-3104 REG. $17.98
SALE $11.00
3/16" 7/8" 3/8" 2-1/4" 1/2" P14-3105 REG. $17.98
SALE $12.00
1/4" 1" 1/2" 2-3/16" 1/4" P14-3106 REG. $17.98
SALE $11.00
1/4" 1" 1/2" 2-1/2" 1/2" P14-3107 REG. $17.98
SALE $13.00
5/16" 1-1/8" 1/2" 2-3/16" 1/4" P14-3108 REG. $18.97
SALE $13.00
5/16" 1-1/8" 1/2" 2-3/8" 1/2" P14-3109 REG. $18.97
SALE $13.00
3/8" 1-1/4" 5/8" 2-5/16" 1/4" P14-3110 REG. $19.98
SALE $13.00
Backordered until 6/12/2019. Reserve Now!
3/8" 1-1/4" 5/8" 2-1/2" 1/2" P14-3111 REG. $19.98
SALE $14.00
1/2" 1-1/2" 3/4" 2-7/16" 1/4" P14-3114 REG. $24.98
SALE $15.00
1/2" 1-1/2" 3/4" 2-1/2" 1/2" P14-3115 REG. $24.98
SALE $15.00
5/8" 1-3/4" 7/8" 2-3/4" 1/2" P14-3116 REG. $35.98
SALE $17.00
3/4" 2" 1" 3-1/4" 1/2" P14-3117 REG. $37.98
SALE $21.00
1" 2-1/2" 1-5/16" 3-1/4" 1/2" P14-3119 REG. $69.98
SALE $30.00
1-1/4" 3-1/4" 1-3/4" 3-7/8" 1/2" P14-3121 REG. $81.97
SALE $39.00
1-1/2" 3-3/4" 1-7/8" 4-1/16" 1/2" P14-3123 REG. $94.98
SALE $46.00
Backordered until 5/22/2019. Reserve Now!
4 Piece Roundover/Beading Set 1/2" Shank P10-1024 REG. $85.30
SALE $69.99

You May Also Like

Sign up for our eNewsletter