Free "Best Way" Shipping Every Day in the Contiguous USA!( Shipping Info)

Miniature Brass Piloted Router Bits by MLCS

Designed for tight spaces!

See Options Below

Shop with Confidence. Our GUARANTEE.

Full Description Below...

Now you can get into tight spaces and round over those sharp edges. No need for hand sanding. Our bits will give you a smooth quality consistent edge every time. All bits are two flute, carbide-tipped and feature a small 5/32" brass pilot instead of a ball bearing guide.

NEW Item #P14-3194 is a brass-piloted CHAMFER Bit. All other bits listed are Roundover profile.


3-Piece Brass-Piloted Roundover Bit Set #P10-3901 Includes: 1/16", 1/8", and 1/4" radius brass-piloted roundover bits (#P14-3196, #P14-3197, and #P14-3198).

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Shank Size Item # Price    Qty
1/16" 5/16" 7/16" 2" 1/4" P14-3196 REG. $18.87
SALE $16.00
1/8" 7/16" 3/8" 2" 1/4" P14-3197 REG. $19.88
SALE $16.00
1/4" 11/16" 1/2" 2-1/8" 1/4" P14-3198 REG. $20.97
SALE $17.00
3/8" 15/16" 5/8" 2-1/4" 1/4" P14-3199 REG. $22.97
SALE $18.00
3 Piece Mini-Roundover Set - 1/4" Shank P10-3901 REG. $59.72
SALE $49.99
N/A 1-1/8" 1/2" 2" 1/4" P14-3194 REG. $22.97
SALE $19.00

You May Also Like

Sign up for our eNewsletter