Horizontal Crown Molding Bits by MLCS

Review star icon Review star icon Review star icon Review star icon Review star icon 5 of 5 Stars (1 review)

See Options Below

Shop with Confidence. Our GUARANTEE.

Make these crown molding bits by simply pushing the wood over the bit on your router table in multiple passes. Also can be used for fluting large columns and making raised panels. All bits two flute, carbide tipped with anti-kickback design.

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).
Write a Review

1 review
Horizontal Crown Molding Bits by ()
Review star icon Review star icon Review star icon Review star icon Review star icon 5 Stars
I learned about this bit from Professional Internet woodworker Charles Neil. I use the bit to machine the cove portion making 3" Ogee Bracket Feet. Be sure to take light easy passes. These bits remove a lot of material.

Product Options

Item # Price    Qty
5/16" 3/8" 1-3/4" 1-3/8" 2-1/8" 1/2" P14-3625 REG. $44.88
SALE $24.00
3/8" 5/8" 2-1/2" 2-1/4" 2-3/8" 1/2" P14-3626 REG. $62.97
SALE $32.00
3/8" 5/8" 2-3/4" 2-3/4" 2-3/8" 1/2" P14-3627 REG. $69.98
SALE $35.00
Sign up for our eNewsletter