Tambour Door 2 Piece Router Bit Set by MLCS

Create roll top desks and bread boxes!

See Options Below

Shop with Confidence. Our GUARANTEE.

2 flute, carbide-tipped 1/2" Shank router bits with anti-kickback design.

  • Create beautiful and professional looking customized tambour doors for roll top desks and bread boxes.
  • Unique interlocking pattern keeps slats aligned.
  • Designed to be used in both single and double curve applications.
  • The slats can be mounted over canvas or joined with cable wire kit (not included) to allow the beauty of both sides to be seen.

    Product Instructions:

    Tambour Door 2 Piece Router Bit Set

    Router Safety Chart - Suggested Speeds:

    Bit Diameter Max Speed
    up to 1" 24000 RPM
    1-1/16" to 2" 18000 RPM
    2-1/16" to 2-1/2" 16000 RPM
    2-9/16" to 3" 14500 RPM
    over 3" 12000 RPM

    Router Safety Tips:

    • Always wear eye and ear protection.
    • Always use properly sharpened bits.
    • Never use bits that are dull or damaged.
    • Shank must be completely inserted into collet and then backed-off approximately 1/16".
    • Don't "bottom-out" bit in collet.
    • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
    • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
    • Keep collet clean and replace if worn.
    • Never start the router with the bit in contact with wood.
    • Always feed your work or router in the proper direction against the bit rotation.
    • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
    • Do not face tool's discharge when operating.
    • Always unplug router when changing bits or making adjustments.
    • Use a router table and fence whenever possible.
    • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
    • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
    • The bigger the bit, the lower RPM recommended (see chart).

    Product Options

    Description Item # Price    Qty
    2-Piece Tambour Door Set for 5/8" Stock #8593
    (Old/Eagle P14-3694)
    REG. $99.95
    SALE $79.95
    SAVE $20!

    You May Also Like

    Sign up for our eNewsletter