2-Piece Matched Stile and Rail Bit Sets by MLCS

For 11/16" to 7/8" Thick Stock

See Options Below

Shop with Confidence. Our GUARANTEE.

Full Description Below...

Making beautiful and professional looking cabinet doors is easy!

Our cutters can be used to make square edge or arch cathedral pattern doors without the need for a fence. Bits can be converted to make beautiful glass door or picture frames from 5/8" to 1" thick without the need for additional cutters. You can also flip your stock over to create up to 1-3/8" double passage interior doors. All bits two-flute, carbide-tipped, anti-kickback design, 1/2" shank with ball bearing guides and cut a standard 1/4" thick x 3/8" deep tongue (except Mission Style #P15-3843 which cuts a 5.2mm thick by 3/8" deep slot for plywood panels). Use in router table only. Instructions available online. Click the "Tech Info" tab above.

Use item #P15-1050 Flat Panel (Metric) Conversion Kit to convert standard 1/4" x 3/8" slot sets to accept undersized plywood panels.

All Bits 1/2" Shank, 2-Piece Matched Sets. Setup Kwik Blocks and Door templates are also available.

brand - click here
What's the difference?

Product Instructions:

2-Piece Matched Stile and Rail Bit Sets

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Profile Kwik Block Set Item # Price    Qty
Roman Ogee 486-1825 P15-3820 $69.95
Traditional Ogee 486-1823 P15-3818 $69.95
Round 486-1826 P15-3821 $69.95
Bead 486-1827 P15-3822 $69.95
15° Shaker Bevel 486-1861 P15-3841 REG. $109.99
SALE $69.95
Backordered until 6/5/2019. Reserve Now!
Double Round 486-1829 P15-3842 $69.95
Mission (5.2mm) N/A P15-3843 $69.95
Mission (1/4") N/A P15-3844 $69.95
Sign up for our eNewsletter