Matched Rail and Stile Router Bit Sets by MLCS

Two Piece Sets Ensure a Perfect Joint

See Options Below

Shop with Confidence. Our GUARANTEE.

Voted "Best Cut" in Fine Woodworking #107!

These carbide tipped cutters come as a matched 2 bit set so that the rail and stile match precisely. They cut a 1/4" thick x 3/8" deep tongue on 3/4" stock. Mission Style Set #8846 cuts a 5.2mm high by 3/8" deep slot for plywood panels.

For a stock thickness of 3/4". 1-5/8" Large Diameter. All sets 1/2" shank (except 6547--1/4" shank)

Product Instructions:

Matched Rail and Stile Router Bit Sets

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Image Profile Set-Up Block Item # Price    Qty
Ogee 1/4" Shank 9741 6547 $69.95
Ogee 9741 #8847
(Old/Eagle P15-3820)
Traditional 9743 #8836
(Old/Eagle P15-3818)
Round Over 486-1826 #8843
(Old/Eagle P15-3821)
Beading 486-1827 #8844
(Old/Eagle P15-3822)
15° Shaker Bevel 9748 #8837
(Old/Eagle P15-3841)
Double Round 9749 #8842
(Old/Eagle P15-3842)
Mission (5.2mm) N/A #8846
(Old/Eagle P15-3843)
Mission (1/4") N/A #8841
(Old/Eagle P15-3844)
Sign up for our eNewsletter