Shaker Bevel Raised Panel Router Bits by MLCS

Make Shaker Raised Panel Doors!
Review star icon Review star icon Review star icon Review star icon Review star icon 4 of 5 Stars (1 review)

See Options Below

Shop with Confidence. Our GUARANTEE.

2 flute, carbide tipped, 1/2" Shank Bits with totally enclosed ball bearing guide.

  • Produce shaker style raised panels with a 1/2" deep tongue.
  • Classic beauty in simplicity.
  • Smaller profiles (like #8685) give a raised panel effect on drawer fronts.
  • #8686 is also used on large doors.
  • Use #8678 for Thomas Moser Shaker style furniture.

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).
Write a Review

1 review
Luke by ()
Review star icon Review star icon Review star icon Review star icon Review star icon 4 Stars
For the price, these bits are good. If you have more than 10 doors to do with hard wood, better to go with Eagle America bits. The investment is worth it. BTW: Either the drawing is wrong, or someone took the wrong measurement for the product descriptions. The "C" distance of 9/16" for P15-3909 as shown in the drawing is actually 1-1/8". The measurement from the bearing guide to the bottom of the cutter blade is 9/16", not the top of the blade.

Product Options

Image Profile Large Diameter Shank Size Item # Price    Qty
18° Shaker Bevel 3-1/2" 1/2" 8676 $46.95
Backordered until 1/17/2022. Reserve Now!
25° Shaker Bevel 1-5/8" 1/2" 8685 $30.95
25° Shaker Bevel 3-1/4" 1/2" 8686 $46.95
67-1/2° Shaker Bevel 2-1/8" 1/2" #8684
(Old/Eagle P15-3911)
$42.95
45° Shaker Bevel 2-3/4" 1/2" #8678
(Old/Eagle P15-3909)
$46.95
Sign up for our eNewsletter