Free "Best Way" Shipping Every Day in the Contiguous USA!( Shipping Info)

2 & 3 Wing Raised Panels With Back Cutter by MLCS

See Options Below

Shop with Confidence. Our GUARANTEE.

Use for 5/8" to 1" stock. Bits include a 3/8" radius back cutter for milling both sides of the panel in the same cut while producing a perfect 1/4" spaced tongue. Cutters can also be used to produce flush rather than raised panels while adding a decorative back appearance. All bits carbide tipped, anti-kickback design, with bearing guide, 1/2" shank.

B = 1/2", C = 1-3/8"

brand - click here
What's the difference?

Product Instructions:

2 & 3 Wing Raised Panels With Back Cutter

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Profile Type Item # Price    Qty
Cove 2-Wing w/ Backcutter P15-3937 $54.95
Ogee 2-Wing w/ Backcutter P15-3938 $54.95
18° Bevel 2-Wing w/ Backcutter P15-3936 $54.95
Cove 3-Wing w/ Backcutter P15-3960 $69.00
18° Bevel 3-Wing w/ Backcutter P15-3964 $69.00
Sign up for our eNewsletter