Free "Best Way" Shipping Every Day in the Contiguous USA!( Shipping Info)

Wainscot Paneling / Beadboard System by MLCS

For 3/8" to 5/8" stock

See Options Below

Shop with Confidence. Our GUARANTEE.

Create beautiful Wainscoting wall trim and paneling for backs of bookcases and more. The special 2-piece "V" Tongue and Groove set (P16-4029) features a rounded tapered tongue for easy insertion. The extra long 45 degree Beading Bit (P16-4046) allows you to produce a 3/16" bead in boards up to 4" wide. All bits, two flute carbide tipped with anit-kickback design, 1/2" shank. Instructions included.

3-Piece Value Set
Includes 2-Piece "V" Tongue and Groove set (P16-4029) and 45 degree Beading Bit (P16-4046).

Product Instructions:

Wainscot Paneling / Beadboard System

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

T Overall
Item # Price    Qty
1-1/4" 3/4" 3/16" 3/32" 2-1/4" P16-4029 REG. $69.95
SALE $59.95
1-1/4" 5/8" 3/16" - 3-5/8" P16-4046 $34.95
3 Piece Wainscot Panel Set 1/2" Shank P10-1631 REG. $99.95
SALE $79.95
SAVE $15!
Sign up for our eNewsletter