COVID-19 Notice: Please e-mail for help and support. Phone operators can process orders only. ( More Info)

Window Sill Edge and Stool Bits by MLCS

For that simple old fashioned look!

See Options Below

Shop with Confidence. Our GUARANTEE.

Makes great old fashioned window sills or bar stools for when the gang comes over for a few. Designed to be used with router edge guide or in a table. All bits two flute, carbide tipped with anti-kickback design.

•Part numbers ending with "B" feature top mounted oversized bearing to prevent pattern wear.
• Use P18-3602 for 3/4" stock
• Use P18-3604 for 5/4" stock

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Shank Item # Price    Qty
1-1/4" 1-1/8" 7/32" 3/8" 1/2" P18-3602 $29.95
1-1/4" 1-1/8" 7/32" 3/8" 1/2" P18-3602B $59.17
1-7/16" 1-3/8" 3/8" 1/2" 1/2" P18-3604 $34.95
1-7/16" 1-3/8" 3/8" 1/2" 1/2" P18-3604B $67.47
Sign up for our eNewsletter