Miniature 1/8" Shank Carbide Router Bits by MLCS

Use with your Dremel

See Options Below

Shop with Confidence. Our GUARANTEE.

These bits will cut cleaner and stay sharper longer than high speed steel and you won't find this selection anywhere else. These bits are great for free hand sign making, as well as making inlays, miniature moldings or simply putting a decorative edge on your next project. Bits fit Dremel, Roto-Zip, Craftsman, Black & Decker or any other mini router tools that uses 1/8" shank bits. All bits two flute, carbide tipped, with 1/8" shanks. Try'em, you'll love 'em!

NOTE:
• For 1/8" Solid Carbide Spiral bits click here.

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Image Radius/
Angle
Large
Dia.
Cutting
Length
Overall
Length
Item # Price    Qty
B -- 1/8" 1/2" 1-7/8" P18-7001 REG. $15.99
SALE $11.95
B -- 1/4" 1/2" 1-1/2" P18-7004 REG. $15.99
SALE $11.95
D 1/8" 1/8" 1/4" 1-3/16" P18-7009 REG. $15.99
SALE $11.95
H 1/8" 3/8" 1/4" 1-1/4" P18-7016 $17.95
I 1/8" 3/8" 1/4" 1-1/4" P18-7018 REG. $16.99
SALE $15.95
J 45° 1-11/64" 3/4" 2" P18-7020 REG. $19.99
SALE $17.95
K 1/16" 3/8" 1/4" 1-1/4" P18-7024 REG. $15.99
SALE $13.95
L 1/16" 3/8" 1/4" 1-1/4" P18-7026 REG. $16.99
SALE $14.95
N 1/16" 3/8" 1/4" 1-1/4" P18-7030 REG. $16.99
SALE $14.95
Sign up for our eNewsletter