iGaging ROLLBOT™ Tapeless Measuring Gauge
iGaging ROLLBOT™ Tapeless Measuring Gauge is as simple as hold and roll measuring.
Tape measures went digital some time ago, but those were laser-based and only performed linear measurements. The Rollbot from iGaging uses a simple serrated ring around its circular edge to roll like a wheel across any flat, curved, or irregular surface with the measurement appearing in a digital display on the front of the tool.
The Rollbot can easily measure linear dimensions like the length of a board. But, it can also calculate the square inches of a board face, or calculate board feet or calculate the round area and diameter of cylinders such as tree trunks or turning blanks by measuring the circumference. Plus, it can do corner and inside measurements such as from one end of a bookshelf to the other by merely adding its dimension to the measurement it rolls.
Easily Measure Unusual Objects
Cylinders - Round Objects - Curvy Surfaces - Curvy Paths.
Linear - Area - Cylinder - Diameter - Board Feet - Cube Feet
iP40 protective rating:
Solid objects over 1 mm
Measuring range: 0 - 144 inch/3.6 m
Accuracy: plus/minus 0.1% of calculated value
Measuring speed: 6m/second
Working temperature: 0 - 40 degree C
Metal marking scriber included
Auto shut-off after 30 minutes
Battery: CR2032 included.