Router Speed Control | MLCS Woodworking
Our MLCS Woodworking Router Speed Control allows you to work at the best speed for the bit and the wood.
Reduces speed without reducing torque. Electronic feedback maintains speed by increasing voltage to motor as load increases.
Heavy Duty 20 AMP Router Speed Controller features better circuitry and heavier components! Features an aluminum case, and is recommended for industrial and commercial use.
Simply plug in speed control then plug your router into the speed control. Adjust speed from 0 RPM to full speed.
- Less tear out • Stops burning • Feed at comfortable rate
- Better, safer results with large diameter panel raising bits
- Less wear on bits • Less noise • Softer starts at lower speeds
- Adjustable speed from 0 RPM to full speed
- 3 position rocker switch- Variable / Off / Full Speed
- Full power and torque at all speeds
- Go back and forth from any preset speed to full speed at the flip of a switch
- Works with most routers 3-1/4 HP or less • 120V
- Give your router a feature only available on expensive routers
- Easy to use- Simply plug in speed control and plug your router into the speed control- turn dial slowly for best results. (Speed control has a clip that can be worn on your belt, hung on wall, or left loose).
- Dust Cover Included (not shown in photo)
NOTE: Will not work with soft start or variable speed routers. Will not work with "AC capacitor start induction" type motors.
Remember, when purchasing a variable speed control, heavy duty is not always better! Speed controls are calibrated by load rating, so match your speed control to the power requirements (amperage) of your tool!
